PRODUCTS CENTER
Papua New Guinea Single component epoxy adhesive
Category:
Papua New GuineaSingle Component Epoxy Adhesive
Product Description
■Features:
■It has good heat resistance and thermal stability.
■Medium and high temperature curing.
■Good thermal conductivity.
■It has extremely high bonding strength and good impact resistance.
■One-component packaging, easy to use.
■Typical applications:
■Used for power fan wear-resistant and high-temperature resistant ceramic sheet bonding.
■The main application is the bonding and potting of high-temperature resistant electronics, electrical appliances and components.
■It is applied to bonding between silicon steel sheets to reduce noise.
■How to use:
1. After taking out the glue from the refrigerator, it needs to be left at room temperature for 1.5-2 hours, and it can be used after equilibrium with room temperature.
2. Keep the surface of the bonded parts clean and free of impurities such as oil.
3. The spilled adhesive can be cleaned with acetone or absolute ethanol.
4. After bonding, a certain contact pressure needs to be applied.
5. It needs to be heated and cured.
6. After curing, it should be cooled slowly in the oven to avoid internal stress.
*Product storage period: -15°C x 3 months. Keep in the refrigerator.
| Product | Colour | Dosage form | Mpa.s(40℃) | Cure Condition | Shore | Character |
| Waen®EP951H | Grey | one-component | 5000 | 120℃x60min | 80D | The bonding between the silicon steel sheets of the main reactor is easy to erase. |
: next page
Focusing on the innovation and application of adhesives in the electronic market
Tel：+86 0513-89070499
Mobile：+86 18944415919
Marketing Center: Room 405, Building 1, Shuangyi International Building, No. 3 Changtong Road, Nantong Development Zone
Production address: No. 197 Ruixing Road, Chongchuan District, Nantong City, Jiangsu Province
Scan and follow us
Add WeChat consultation to us
Copyright © 2023 Jiangsu Waen New Materials Technology Co., Ltd by：www.300.cn Business License Cloud Information Urban substation
